How to choose the best airplane seat for using a kid seat extender?
- First of all, we need to know which are the best plane seats for using kids' airplane seat extenders.
If classified according to the principle of the product, there are mainly two types of kids' airplane seat extenders on the market.
One is just putting the kid's airplane seat extender under the feet of the airplane seat, filling the gap in front of the seat, the other relies on the tray table of the seat in front.
In this article, we are talking about how to use the kids airplane seat extenders relying on the front seat's tray table.
One side of the kids' airplane seat extender (also known as kids airplane travel bed, toddler airplane footrest) is buckled on the tray table behind the front seat of the aircraft through the belt, and the other side is connected to the airplane seat belt, so there are requirements for the aircraft seat position.
The front of the seat in business class doesn’t have a tray table on the front seat; therefore, business class is excluded, and for security reason, the first row of economy class and the row of the emergency exit of the plane (we also called the extra legroom seats) are also excluded. (Different planes have different seat distribution, the following picture is for reference only)
In addition, the aircraft may encounter turbulence during the flight, the child is unsafe if the child sits near the corridor at this time. So, the best choice for the child is sitting in the middle seat or by the window, as shown in the figure ABEJK these rows of seats.
So, if you want to use the kids' airplane seat extenders on the plane, before flying, you need to choose a suitable seat.
In a word, choose the window seats or the middle seat in the center rows with a tray table in front.
- How to set up kids' airplane seat extenders?
Take out the kid's airplane seat extender after finding your seat.
Firstly, we need to place the obverse side of the product ( with the velcro) on the seat, the reverse side has a non-slip design.
Before the child is seated, both sides of the seat belt on the flight can be passed through the Velcro, and then pasted the Velcro.
The length of the entire kids' airplane seat extender can actually be adjusted by adjusting the length of the Velcro.
Then put down the tray table, the safety buckle goes around the legs of the tray and then is buckled. You can adjust the length appropriately, in the same way as the adjustment method of the schoolbag strap.
Lock the tray table into place and then finally can let the kids lie down on the plane.
During the flight, don’t unfasten the seat belt.
When the plane is ready to land, unbuckle the safety buckle, and finally lock the tray table into place, and wait for the plane to land.
After the plane land off, let the children leave the seat, untie the Velcro, fold the kid's airplane seat extender, and put it in the storage bag and take it to go !
Hope the kids airplane seat extender can bring you a pleasant trip!
